Welcome!

Mobile IoT Authors: Pat Romanski, Yeshim Deniz, Shelly Palmer, Liz McMillan, Ravi Rajamiyer

Related Topics: PowerBuilder, Microsoft Cloud

PowerBuilder: Article

The PostOpen Event – Why It Is So Important

PowerBuilder fundamentals

Normally I try to write applications on the DataWindow or Appeon but every now and then I get a question that makes me sit back and say, "Huh?"

In this case the question concerns the PostOpen event. I've seen that event named different things: ue_post_open, postOpen, post_open, ue_postOpen, etc. It has, as far as I can see, always had post and open in the name of the event. Further, just about every framework that I've ever seen has had that event in the base window.

The question that I was asked was, "Why is that event there?"

The programmer wanted to know why there was code in the post open and why was it not just put at the end of the open event? At first I was really confused by the question. It was like he was asking me why do we have arrays? I just couldn't imagine not knowing the answer.

Then it occurred to me that I learned the answer to that question from a book that was published almost 20 years ago. As far as I can tell there are no new books on PowerBuilder and there are only two print magazines, this one and the ISUG magazine.

That's it.

Further I came to think of the tremendous responsibility that the few PowerBuilder authors share. New PowerBuilder programmers turn to us for information and there aren't that many of us left writing. So that leaves a whole lot of PowerBuilder programmers who get all their training from reading the code of other programmers.

Often those other programmers were consultants who wrote the code ten years ago and worked for consulting firms that no longer exist.

To make a bad situation worse a lot of times those programmers are brave souls that have been recruited from other disciplines. When the company finds that their last PowerBuilder programmer has just quit because he got a much better offer they turn to their existing programming staff and ask who would like to pick up PowerBuilder. They may point out that there are 6 or 10 or, as in the case for one company for which I recently worked, 26 PowerBuilder programs that are all critical to the company. The PowerBuilder programmer would become indispensable to the company.

So suddenly a brave Visual Basic or Java programmer finds PowerBuilder installed on his machine. His boss pats him on his pointy little head and tells him that Google is his friend.

Where would you turn? If you picked up the mantle and offered to learn a language that you knew nothing about, what would you do? You'd turn to Amazon or Google. If you type "best PowerBuilder books" in Google the first mentioned is my Definitive DataWindow which was published 13 years ago and is embarrassingly out of date...and out of print.

Let's go to Amazon, there you will find the latest PowerBuilder book is for version 9. It was published 10 years ago. Since then... nothing.

Why should I be surprised that things that I find fundamental are entirely unknown by the newest PowerBuilder programmers.

Warning: If you are a seasoned PowerBuilder programmer the rest of this article will bore you silly.

There is an open event in a window. This is the event that happens when the window is "opened." Now the word ‘open' can be deceptive. A lot of people feel that a window is only opened when it is shown on the screen.

That would be wrong.

The open of a window begins when the open command is issued. That is to say, with a line like:

Open(w_client_editor)

The problem, the whole reason that a post open event is required goes all the way back to Microsoft Windows 3.0 Old Windows programmers will remember version 3.0 very well. Version 3.0 was almost the death of Microsoft Windows. It was unbearably slow. I am not exaggerating; it was the slowest version of Windows that was ever released.

It was so slow that Windows users were seriously studying what the impact of changing to another - any other - operating system would be.

This time Microsoft listened... and panicked. They did a study to determine what it is that makes the user perceive speed in an application. What could be changed to cause the user to believe that the application is faster with minimal real change to the operating system? It wasn't that Microsoft didn't want to address their problems with speed, they most certainly did, but addressing those problems would take time that Microsoft just didn't have. Microsoft was about to lose a lot of customers and once lost, it would be hard to get them back.

Microsoft learned that the visual perception strongly influenced the user's perception of speed. They learned that if the window POPPED onto the screen, all at once, even if the data wasn't there yet, then the users perceived speed. What killed the user perception was when they pressed a button and nothing happened for four seconds. The user would often punch that button two or three times. So Microsoft created operating system queues.

The graphics queue happened before the application queue. So graphics could be given a higher priority than the application and windows would paint faster. They released version 3.1 which was mostly just the addition of these queues (along with other changes like a floating point emulator in assembly code).

This was great but it broke the relationship of the open event with the code. This meant that you weren't guaranteed that everything would be created in the window until after the open event finishes.

Consider this code:

W_customer.open() event
Dw_1.setTransObject(sqlca)
Dw_1.retrieve()

This code would often result in a "Null object reference" error because dw_1 had not been created by Microsoft when the code ran.

Imagine how we felt when this happened. There was a null object reference in line 1 of the open event, but, but, but... that's dw_1. There it is, right there on the window! How can it be null? It's not dynamic. You put it there.

Okay, we learned that we should not put anything in the open event that referred to anything on the screen. Most of us learned to just not put anything at all in the open event except one line in the ancestor:

W_root.open() event
post event ue_post_open( )

For reasons already stated I imagine I can't rely on you knowing the difference between post event and trigger event or for that matter between postOpen and post open.

Okay, one at a time. Posting an event means that Microsoft Windows will open this window after the rest of the code in this script is executed. Basically it means, "Do this when you get a chance." So if you add that to the open event of your root window then it will call the ue_post_open event after all of the code in all of the descendants of this window is done.

Keep in mind the order of execution of events. First PowerBuilder goes to the farthest ancestor and then starts executing down the inheritance tree. If you have w_grandpa, and w_pa inherits from that and w_son inherits from that then the code in w_grandpa.open would execute first, then the code in w_pa, finally the code in w_son.

This means that if we put the post event in the open of w_grandpa, then the ue_post_open would happen after the last open event in the descendants. In our example:

W_grandpa.open->w_pa.open->w_son.open-> w_grandpa.ue_post_open-> w_son.ue_post_open->w_son.post_open

All that we have to do is create a ue_post_open event in our root window. We don't have to put anything in it, just create one. Then we post that event from the open event and we have a place now to put all our initialization code and don't have to worry about whether any object exists or not.

More important the screen will quickly draw or paint, giving the user the perception of speed. If you need to retrieve data and know it will take a short time, then you can set the pointer to an hourglass. I guarantee that your user will feel the window is faster.

I mentioned that most of us learned not to put anything in the open event. There is an exception to that rule. When your window is opened with a parameter then you should access the message object as the first line of code in your window.

Let me give you an example. Suppose that you open a window with a customer_id. You are going to use that customer_id as a parameter to the datawindow dw_1. Here is what you would do.

W_calling_window
Long ll_customer_id
Ll_customer_id = dw_detail.getItemNumber(dw_detail.getRow(), "customer_id")
openWithParm(w_customer_detail, ll_customer_id)

Now in the w_customer_detail window you need to set an instance variable. That's because we have just passed a variable to the new window and we are going to get it in the open event but we are going to retrieve the DataWindow in the ue_postOpen event. So let's do this. I will assume that you know how to declare an instance variable. Let's name it il_customer_id. Now let's look at the open event of w_customer_detail.

W_customer_detail.open()
il_customer_detail = message.longParm

Okay, now in the open event of w_customer_detail we have taken the longParm property of the global message object and put it in an instance variable.

Since we have inherited the w_customer_detail from whatever our base window is, the ue_postOpen event will automatically fire. That means that we don't have to fire off the event. Now I just have to put the code that we need in the window.

W_customer_detail.ue_postOpen()
dw_customer_info.setTransObject(sqlca)
dw_customer.retrieve(il_customer_detail)

Let's Do Some Housekeeping
I think that we've pretty well covered the post open event but in the process of doing that I've brought up a couple of other issues that I'd like to cover just to be complete.

First let's talk about post event as opposed to postEvent.

With the post event command you must know the name of the event that you want to post. You can pass the parameters normally. However, just like calling a function, the event has to exist and the parameters must be correct.

On the other hand the postEvent function takes a string as a parameter and that string is the name of the event. This means that you can store the name of the event in a table. In fact the event doesn't even have to exist. If it doesn't then nothing will happen. There will be no error thrown.

This makes the postEvent perfect for security systems where you can post an event based on a security role. Here is some code that might work for you in a menu event.

M_main.m_file.m_save.clicked
Datastore ld_security, ld_events
ld _secutity = create datastore
ld_events = create datastore

ld_events.dataobject = "d_events"
ld_security.dataobject = "d_get_security"

ld_events.setTransObject(sqlca)
ld_security.setTransObject(sqlca)

parentWindow.postEvent(ld_events.retrieve(ld_security.retrieve(gs_user_id)))

Using the postOpen function is very flexible but it is limited in the parameters that can be passed it. If you use the post event command, you can pass any number of parameters that you wish. The caveat is that the event must exist or you will get a compile time error. So the event that you used before for security cannot be done.

All that I just said for the postEvent and post event command applies also to the triggerEvent and trigger event commands.

Finally I'd like to mention the global message object.

This object is global. It can be accessed at any time by any other object. That means that if you access the message object in the postOpen event then another window may have changed your message object properties and this could corrupt what you are expecting.

Don't take this lightly. More than once I've debugged and found this error and believe me it is difficult to find. The problem is that it is not an error with logic or data but a timing error. These can be close to impossible to find.

Please take my word for this, make it a golden rule. If you open a window with a parameter, the first thing you do in the target or opened window is grab that value from the message object and store it.

Also, if you do a closeWithReturn then you need to immediately get the value from the message object.

There you have it. I've covered in some detail some basic information that might not be so easily learned any more.

More Stories By Richard (Rik) Brooks

Rik Brooks has been programming in PowerBuilder since the final beta release before version 1. He has authored or co-authored five books on PowerBuilder including “The Definitive DataWindow”. Currently he lives in Mississippi and works in Memphis, Tennessee.

Comments (1) View Comments

Share your thoughts on this story.

Add your comment
You must be signed in to add a comment. Sign-in | Register

In accordance with our Comment Policy, we encourage comments that are on topic, relevant and to-the-point. We will remove comments that include profanity, personal attacks, racial slurs, threats of violence, or other inappropriate material that violates our Terms and Conditions, and will block users who make repeated violations. We ask all readers to expect diversity of opinion and to treat one another with dignity and respect.


Most Recent Comments
ywerde 02/20/13 04:14:00 PM EST

In your introduction you clearly state the problem new PowerBuilder developers face when they find the IDE installed on their machine. You then go on to talk about the lack of current training materials.
One important cost effective training resource you omitted is the online training from ISUG/eLearnIT. Everyone can learn more here.

@ThingsExpo Stories
SYS-CON Events announced today that NetApp has been named “Bronze Sponsor” of SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. NetApp is the data authority for hybrid cloud. NetApp provides a full range of hybrid cloud data services that simplify management of applications and data across cloud and on-premises environments to accelerate digital transformation. Together with their partners, NetApp em...
SYS-CON Events announced today that SIGMA Corporation will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. uLaser flow inspection device from the Japanese top share to Global Standard! Then, make the best use of data to flip to next page. For more information, visit http://www.sigma-k.co.jp/en/.
Agile has finally jumped the technology shark, expanding outside the software world. Enterprises are now increasingly adopting Agile practices across their organizations in order to successfully navigate the disruptive waters that threaten to drown them. In our quest for establishing change as a core competency in our organizations, this business-centric notion of Agile is an essential component of Agile Digital Transformation. In the years since the publication of the Agile Manifesto, the conn...
Real IoT production deployments running at scale are collecting sensor data from hundreds / thousands / millions of devices. The goal is to take business-critical actions on the real-time data and find insights from stored datasets. In his session at @ThingsExpo, John Walicki, Watson IoT Developer Advocate at IBM Cloud, will provide a fast-paced developer journey that follows the IoT sensor data from generation, to edge gateway, to edge analytics, to encryption, to the IBM Bluemix cloud, to Wa...
There is huge complexity in implementing a successful digital business that requires efficient on-premise and cloud back-end infrastructure, IT and Internet of Things (IoT) data, analytics, Machine Learning, Artificial Intelligence (AI) and Digital Applications. In the data center alone, there are physical and virtual infrastructures, multiple operating systems, multiple applications and new and emerging business and technological paradigms such as cloud computing and XaaS. And then there are pe...
SYS-CON Events announced today that Keisoku Research Consultant Co. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Keisoku Research Consultant, Co. offers research and consulting in a wide range of civil engineering-related fields from information construction to preservation of cultural properties. For more information, vi...
SYS-CON Events announced today that N3N will exhibit at SYS-CON's @ThingsExpo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. N3N’s solutions increase the effectiveness of operations and control centers, increase the value of IoT investments, and facilitate real-time operational decision making. N3N enables operations teams with a four dimensional digital “big board” that consolidates real-time live video feeds alongside IoT sensor data a...
WebRTC is great technology to build your own communication tools. It will be even more exciting experience it with advanced devices, such as a 360 Camera, 360 microphone, and a depth sensor camera. In his session at @ThingsExpo, Masashi Ganeko, a manager at INFOCOM Corporation, will introduce two experimental projects from his team and what they learned from them. "Shotoku Tamago" uses the robot audition software HARK to track speakers in 360 video of a remote party. "Virtual Teleport" uses a mu...
Internet of @ThingsExpo, taking place October 31 - November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA, is co-located with 21st Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. The Internet of Things (IoT) is the most profound change in personal and enterprise IT since the creation of the Worldwide Web more than 20 years ago. All major researchers estimate there will be tens of billions devic...
Mobile device usage has increased exponentially during the past several years, as consumers rely on handhelds for everything from news and weather to banking and purchases. What can we expect in the next few years? The way in which we interact with our devices will fundamentally change, as businesses leverage Artificial Intelligence. We already see this taking shape as businesses leverage AI for cost savings and customer responsiveness. This trend will continue, as AI is used for more sophistica...
SYS-CON Events announced today that SourceForge has been named “Media Sponsor” of SYS-CON's 21st International Cloud Expo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. SourceForge is the largest, most trusted destination for Open Source Software development, collaboration, discovery and download on the web serving over 32 million viewers, 150 million downloads and over 460,000 active development projects each and every month.
SYS-CON Events announced today that DXWorldExpo has been named “Global Sponsor” of SYS-CON's 21st International Cloud Expo, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Digital Transformation is the key issue driving the global enterprise IT business. Digital Transformation is most prominent among Global 2000 enterprises and government institutions.
SYS-CON Events announced today that B2Cloud will exhibit at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. B2Cloud specializes in IoT devices for preventive and predictive maintenance in any kind of equipment retrieving data like Energy consumption, working time, temperature, humidity, pressure, etc.
DevOps at Cloud Expo – being held October 31 - November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's largest enterprises – and delivering real r...
SYS-CON Events announced today that Massive Networks, that helps your business operate seamlessly with fast, reliable, and secure internet and network solutions, has been named "Exhibitor" of SYS-CON's 21st International Cloud Expo ®, which will take place on Oct 31 - Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. As a premier telecommunications provider, Massive Networks is headquartered out of Louisville, Colorado. With years of experience under their belt, their team of...
SYS-CON Events announced today that Suzuki Inc. will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Suzuki Inc. is a semiconductor-related business, including sales of consuming parts, parts repair, and maintenance for semiconductor manufacturing machines, etc. It is also a health care business providing experimental research for...
SYS-CON Events announced today that Fusic will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Fusic Co. provides mocks as virtual IoT devices. You can customize mocks, and get any amount of data at any time in your test. For more information, visit https://fusic.co.jp/english/.
SYS-CON Events announced today that Ryobi Systems will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Ryobi Systems Co., Ltd., as an information service company, specialized in business support for local governments and medical industry. We are challenging to achive the precision farming with AI. For more information, visit http:...
SYS-CON Events announced today that Daiya Industry will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Daiya Industry specializes in orthotic support systems and assistive devices with pneumatic artificial muscles in order to contribute to an extended healthy life expectancy. For more information, please visit https://www.daiyak...
SYS-CON Events announced today that Interface Corporation will exhibit at the Japan External Trade Organization (JETRO) Pavilion at SYS-CON's 21st International Cloud Expo®, which will take place on Oct 31 – Nov 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA. Interface Corporation is a company developing, manufacturing and marketing high quality and wide variety of industrial computers and interface modules such as PCIs and PCI express. For more information, visit http://www.i...