|By Steve Weisfeldt||
|January 7, 2013 08:00 AM EST||
Mobile applications and mobile websites have become a major channel for conducting business, improving employee efficiency, communicating, and reaching consumers. In Part I of this article we discussed the differences between testing traditional and mobile applications, specific challenges associated with mobile load testing, mobile testing basics and best practices for recording mobile load test scenarios. In this Part 2 of the article, we will look at how to conduct realistic tests and how to best analyze the results.
How to Run Realistic Load Tests
Once you've recorded a mobile test scenario, you need to be parameterize it so that it can emulate users with different identities and behaviors as it is played back to produce a realistic load on the server. This step is required for traditional and mobile web applications, and the tools used to complete it are the same. When playing back the test scenarios, however, there are several challenges specific to mobile load testing.
Simulating Network Conditions
Today's mobile devices generally access the server over networks that are slower than those used by desktop computers. Network conditions have a significant effect on the user experience, and the effect may be more or less pronounced depending on the application. Network characteristics including bandwidth, latency and packet loss have a huge impact on client response times and on the way the server is loaded. By simulating different network conditions in a test lab environment you can forecast the effects of changes in the network infrastructure on the application's performance. Doing so also allows you to discover application issues in the development cycle, therefore reducing costs.
Bandwidth, Latency and Packet Loss
For example, low bandwidth increases the time it takes to download a resource, which then results in higher page load times. If the customer is connected longer, front-end servers hold sockets longer, load balancers have more active TCP sessions and application servers use more threads.
Mobile networks have limited bandwidth and high latency compared to Wi-Fi and broadband. Since the latency is a time added to each request and webpages are composed of many sub-requests, the time required to load a webpage on a mobile device greatly depends on the latency.
Limiting bandwidth and simulating latency and packet loss during a load test allows you to check that all of your users, including mobile users, will get the best user experience and acceptable response times while ensuring your servers won't have problems under load.
Bandwidth and Response Times
The bandwidth is directly correlated with how long it takes to download data from the server. The lower the bandwidth, the higher the response time. A server that provides acceptable response times for desktop users using DSL or another high-speed broadband service may deliver a poor end-user experience to mobile users with lower bandwidth.
It is important to validate your service-level agreements (SLAs) and performance objectives with tests that use the same bandwidth limitations as your users to avoid making decisions based on misleading test results. Such tests must incorporate bandwidth simulation, which is the process of artificially slowing down the traffic during a test to simulate a slower connection.
Bandwidth and Server Load
Clients using lower bandwidth connections also affect the server. The lower the bandwidth, the longer the connections. Longer connections, in turn, lead to more simultaneous connections on your web server and your application server. Thus, mobile users tend to consume more connections than their wired counterparts. Most servers have settings that limit the number of simultaneous connections that they can handle. Without a testing tool that realistically simulates bandwidth, these settings cannot be properly validated.
Simulating Bandwidth Limitations for Individual Virtual Users
When load testing, effective bandwidth simulation requires the ability to individually limit the bandwidth for each user or groups of users, independent of the others.
Consider a situation in which you need to verify performance when 100 mobile users are accessing the server. In this scenario, you'd want to simulate 100 virtual users, with each user limited to a 1Mbps 3G connection. In this case, the total bandwidth for all users is 100Mbps (100 users * 1Mbps/user). Though it is possible to use WAN emulation software or a network appliance to globally limit the bandwidth for the load generation machine to 100 Mbps (or any other arbitrary limit), in practice this does not provide a realistic test because it does not impose a strict 1Mbps constraint on each user. Bandwidth simulation support must be integrated in the load testing tool to enable bandwidth limits to be applied to individual virtual users.
To conduct an even more realistic test, you'll want to simulate a mixed population of users accessing your application with a variety of bandwidths. With a tool capable of bandwidth simulation on a per virtual user basis, you can determine the response times for users at each bandwidth across a range of bandwidths in a single test. This saves times when you need to compare the response times of web applications and business transactions for clients who have different bandwidth limits.
Simulating Browsers and Browser Capabilities
When a browser requests a resource from a web server, it identifies itself via the user-agent header sent with each request. This header contains information about the browser and the platform on which it is running. Servers use this information to deliver different versions of the content based on the client system. As noted earlier, many web applications deliver different content to mobile users and desktop users. Some further differentiate mobile users into subgroups based on information in the user-agent header, delivering less text and smaller images to devices with small screens. This can lead to bandwidth consumption and loading times that vary widely with the browser and platform being used.
As a result, the ability to manipulate the user-agent header is essential not only for recording test scenarios, but also for playing them back. Tools that lack this capability will fail to retrieve the appropriate content from the server.
Simulating Parallel Connections
Mobile browsers, like desktop browsers, can generate the HTTP requests needed to retrieve the static resources of a web page in parallel. Rather than waiting for each image to finish loading before requesting the next, this approach requests multiple images at once to shorten the overall page load time. To measure response times accurately, load testing tools must replicate this behavior by generating multiple requests in parallel. Moreover, they must simulate the appropriate number of parallel connections as this number may differ from one mobile browser to another. Again, tools that lack this capability are not performing realistic tests, placing the results they deliver into question.
Identifying the Most Appropriate Settings for Realistic Tests
Finding the appropriate values for key test settings - such as the user-agent, bandwidth, and number of simultaneous connections - can be a challenge. More advanced load testing tools can help testers set these values. For example, test scenario playback is greatly simplified by tools that can automatically inform the tester of which user-agent string and number of parallel connections to use based on the browser name, version, and platform. The process is further streamlined when the tools can suggest the most appropriate upload and download bandwidth settings based on the technology used (for example, Wi-Fi, 3G, 3G+, and so on) and the quality of the signal (for example, poor, average, or good).
Using the Cloud
You can use load testing with the cloud after (or in conjunction with) on-premise testing in the lab to improve the realism of your tests by generating high loads and testing from different locations, while saving time and lowering costs.
Generating a High Load
For consumer-facing apps and websites, it's often difficult to predict the number of users your applications will have to handle. Traffic spikes that results from a promotion, marketing campaign, new product release, or even unexpected social network buzz can be substantial. To generate a similar load in-house, you would need a significant investment in hardware. Using the cloud, you can generate the same high load using on-demand resources at a much lower cost.
Testing from Different Geographies
Your web application's real users likely access the server from many different geographical locations and use different networks. To properly validate the application and the server infrastructure, your virtual users should operate under similar real world conditions.
Testing the Entire Application Delivery Chain
When your real users are located outside the firewall, you should run your virtual users from the cloud to validate the parts of the application delivery chain that are not tested when testing from the lab, including the firewall, load balancers, and other network equipment.
Tools for Testing with the Cloud
While the cloud represents an opportunity to rapidly increase the scale and improve the realism of load testing at low costs, cloud testing is most effective when it's used to complement internal load testing. Note that the primary factor in the success of load testing with the cloud is not the move to the cloud, rather it's the tool you select and how well it uses cloud technology. In particular, it's best to select a solution that is integrated with multiple cloud platforms, enables in-house test assets to be reused in the cloud, and supports realistic, large-scale tests across multiple geographical regions.
The default results of a load test are frequently delivered as averages. For example, load testing tools will typically show what errors occurred and the average response times for a request, web page, or business transaction regardless of the type of users being simulated or the bandwidth available to them.
Because bandwidth may vary widely for the different kinds of users simulated, the errors and response times can also vary widely. Taking an average of results with significant variation does not provide an accurate picture of what is really happening. To gain meaningful insights and to validate your SLAs and performance requirements for each network condition, it is important to go beyond the default results and analyze the results for each kind of user.
In many ways, mobile load testing is similar to load testing classic web applications. As a result, testers can leverage much of their existing knowledge and reuse existing techniques - like using the cloud for realistic, large-scale tests. However, there are specific requirements for testing mobile applications that are not addressed by traditional load testing techniques. Recording mobile test scenarios, conducting realistic tests that simulate real-world bandwidth and browser characteristics, and properly analyzing the results are some of the key areas that require special attention for mobile applications. Addressing challenges in these areas is essential to ensuring mobile web applications are sufficiently tested prior to release and that they will perform well under load in production.
In his keynote at 19th Cloud Expo, Sheng Liang, co-founder and CEO of Rancher Labs, will discuss the technological advances and new business opportunities created by the rapid adoption of containers. With the success of Amazon Web Services (AWS) and various open source technologies used to build private clouds, cloud computing has become an essential component of IT strategy. However, users continue to face challenges in implementing clouds, as older technologies evolve and newer ones like Docke...
Oct. 21, 2016 02:15 PM EDT Reads: 2,190
As ridesharing competitors and enhanced services increase, notable changes are occurring in the transportation model. Despite the cost-effective means and flexibility of ridesharing, both drivers and users will need to be aware of the connected environment and how it will impact the ridesharing experience. In his session at @ThingsExpo, Timothy Evavold, Executive Director Automotive at Covisint, will discuss key challenges and solutions to powering a ride sharing and/or multimodal model in the a...
Oct. 21, 2016 02:15 PM EDT Reads: 1,426
SYS-CON Events announced today that Embotics, the cloud automation company, will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Embotics is the cloud automation company for IT organizations and service providers that need to improve provisioning or enable self-service capabilities. With a relentless focus on delivering a premier user experience and unmatched customer support, Embotics is the fas...
Oct. 21, 2016 02:00 PM EDT Reads: 611
Just over a week ago I received a long and loud sustained applause for a presentation I delivered at this year’s Cloud Expo in Santa Clara. I was extremely pleased with the turnout and had some very good conversations with many of the attendees. Over the next few days I had many more meaningful conversations and was not only happy with the results but also learned a few new things. Here is everything I learned in those three days distilled into three short points.
Oct. 21, 2016 02:00 PM EDT Reads: 6,771
SYS-CON Events announced today that Coalfire will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. Coalfire is the trusted leader in cybersecurity risk management and compliance services. Coalfire integrates advisory and technical assessments and recommendations to the corporate directors, executives, boards, and IT organizations for global brands and organizations in the technology, cloud, health...
Oct. 21, 2016 01:45 PM EDT Reads: 1,449
The IoT industry is now at a crossroads, between the fast-paced innovation of technologies and the pending mass adoption by global enterprises. The complexity of combining rapidly evolving technologies and the need to establish practices for market acceleration pose a strong challenge to global enterprises as well as IoT vendors. In his session at @ThingsExpo, Clark Smith, senior product manager for Numerex, will discuss how Numerex, as an experienced, established IoT provider, has embraced a ...
Oct. 21, 2016 01:00 PM EDT Reads: 902
Cloud based infrastructure deployment is becoming more and more appealing to customers, from Fortune 500 companies to SMEs due to its pay-as-you-go model. Enterprise storage vendors are able to reach out to these customers by integrating in cloud based deployments; this needs adaptability and interoperability of the products confirming to cloud standards such as OpenStack, CloudStack, or Azure. As compared to off the shelf commodity storage, enterprise storages by its reliability, high-availabil...
Oct. 21, 2016 01:00 PM EDT Reads: 918
SYS-CON Events announced today that MathFreeOn will exhibit at the 19th International Cloud Expo, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. MathFreeOn is Software as a Service (SaaS) used in Engineering and Math education. Write scripts and solve math problems online. MathFreeOn provides online courses for beginners or amateurs who have difficulties in writing scripts. In accordance with various mathematical topics, there are more tha...
Oct. 21, 2016 12:15 PM EDT Reads: 863
@ThingsExpo has been named the Top 5 Most Influential Internet of Things Brand by Onalytica in the ‘The Internet of Things Landscape 2015: Top 100 Individuals and Brands.' Onalytica analyzed Twitter conversations around the #IoT debate to uncover the most influential brands and individuals driving the conversation. Onalytica captured data from 56,224 users. The PageRank based methodology they use to extract influencers on a particular topic (tweets mentioning #InternetofThings or #IoT in this ...
Oct. 21, 2016 12:00 PM EDT Reads: 8,051
More and more brands have jumped on the IoT bandwagon. We have an excess of wearables – activity trackers, smartwatches, smart glasses and sneakers, and more that track seemingly endless datapoints. However, most consumers have no idea what “IoT” means. Creating more wearables that track data shouldn't be the aim of brands; delivering meaningful, tangible relevance to their users should be. We're in a period in which the IoT pendulum is still swinging. Initially, it swung toward "smart for smar...
Oct. 21, 2016 10:50 AM EDT Reads: 222
Complete Internet of Things (IoT) embedded device security is not just about the device but involves the entire product’s identity, data and control integrity, and services traversing the cloud. A device can no longer be looked at as an island; it is a part of a system. In fact, given the cross-domain interactions enabled by IoT it could be a part of many systems. Also, depending on where the device is deployed, for example, in the office building versus a factory floor or oil field, security ha...
Oct. 21, 2016 10:45 AM EDT Reads: 1,640
SYS-CON Events announced today that Transparent Cloud Computing (T-Cloud) Consortium will exhibit at the 19th International Cloud Expo®, which will take place on November 1–3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. The Transparent Cloud Computing Consortium (T-Cloud Consortium) will conduct research activities into changes in the computing model as a result of collaboration between "device" and "cloud" and the creation of new value and markets through organic data proces...
Oct. 21, 2016 10:30 AM EDT Reads: 1,229
Donna Yasay, President of HomeGrid Forum, today discussed with a panel of technology peers how certification programs are at the forefront of interoperability, and the answer for vendors looking to keep up with today's growing industry for smart home innovation. "To ensure multi-vendor interoperability, accredited industry certification programs should be used for every product to provide credibility and quality assurance for retail and carrier based customers looking to add ever increasing num...
Oct. 21, 2016 09:15 AM EDT Reads: 273
@ThingsExpo has been named the Top 5 Most Influential M2M Brand by Onalytica in the ‘Machine to Machine: Top 100 Influencers and Brands.' Onalytica analyzed the online debate on M2M by looking at over 85,000 tweets to provide the most influential individuals and brands that drive the discussion. According to Onalytica the "analysis showed a very engaged community with a lot of interactive tweets. The M2M discussion seems to be more fragmented and driven by some of the major brands present in the...
Oct. 21, 2016 08:45 AM EDT Reads: 11,126
In an era of historic innovation fueled by unprecedented access to data and technology, the low cost and risk of entering new markets has leveled the playing field for business. Today, any ambitious innovator can easily introduce a new application or product that can reinvent business models and transform the client experience. In their Day 2 Keynote at 19th Cloud Expo, Mercer Rowe, IBM Vice President of Strategic Alliances, and Raejeanne Skillern, Intel Vice President of Data Center Group and ...
Oct. 21, 2016 08:45 AM EDT Reads: 1,373
Machine Learning helps make complex systems more efficient. By applying advanced Machine Learning techniques such as Cognitive Fingerprinting, wind project operators can utilize these tools to learn from collected data, detect regular patterns, and optimize their own operations. In his session at 18th Cloud Expo, Stuart Gillen, Director of Business Development at SparkCognition, discussed how research has demonstrated the value of Machine Learning in delivering next generation analytics to impr...
Oct. 21, 2016 08:00 AM EDT Reads: 5,584
Data is the fuel that drives the machine learning algorithmic engines and ultimately provides the business value. In his session at Cloud Expo, Ed Featherston, a director and senior enterprise architect at Collaborative Consulting, will discuss the key considerations around quality, volume, timeliness, and pedigree that must be dealt with in order to properly fuel that engine.
Oct. 21, 2016 07:45 AM EDT Reads: 3,735
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
Oct. 21, 2016 07:15 AM EDT Reads: 1,284
Virgil consists of an open-source encryption library, which implements Cryptographic Message Syntax (CMS) and Elliptic Curve Integrated Encryption Scheme (ECIES) (including RSA schema), a Key Management API, and a cloud-based Key Management Service (Virgil Keys). The Virgil Keys Service consists of a public key service and a private key escrow service.
Oct. 21, 2016 07:15 AM EDT Reads: 884
Web Real-Time Communication APIs have quickly revolutionized what browsers are capable of. In addition to video and audio streams, we can now bi-directionally send arbitrary data over WebRTC's PeerConnection Data Channels. With the advent of Progressive Web Apps and new hardware APIs such as WebBluetooh and WebUSB, we can finally enable users to stitch together the Internet of Things directly from their browsers while communicating privately and securely in a decentralized way.
Oct. 21, 2016 06:45 AM EDT Reads: 1,796