Welcome!

Mobile IoT Authors: Pat Romanski, Philippe Abdoulaye, Dana Gardner, Scott Allen, Liz McMillan

News Feed Item

National Technical Systems' Boxborough Facility Approved by Verizon to Perform Lead-Free Testing of Electronic, Electric Components

Boxborough, MA Facility is an Approved Verizon Independent Test Laboratory

CALABASAS, Calif. and BOXBOROUGH, Mass., Nov. 15, 2012 /PRNewswire/ -- National Technical Systems, Inc. (NASDAQ: NTSC) (NTS), a leading provider of testing and engineering services, announced today that its Boxborough, MA facility had been approved by Verizon to perform lead (or Pb)-free testing of electronic and electric components. The lead-free testing is an addition to the Telcordia GR-63-CORE and GR-1089-CORE testing that NTS Boxborough performs for Verizon as an approved Verizon Independent Test Laboratory (ITL).

Lead-free equipment is required by RoHS (Restriction of Use of Hazardous Substances) regulations adopted by the European Union to restrict the import of substances considered toxic to the environment.

William C. McGinnis, President and CEO of NTS, said the lead-free testing service will be an important business driver for the Boxborough facility in the near term as telecommunications equipment manufacturers comply with the RoHS regulations.  McGinnis added that NTS is the largest member of the Verizon ITL program with seven approved laboratories and the only ITL with an international location.

"This lead-free certification is yet another demonstration of the breadth of our testing services and our ability to adapt to the requirements of a changing, dynamic marketplace," said McGinnis. "We have a relationship with Verizon in terms of testing services and lead-free testing that will increase the value of this business partnership."

As a member of the Verizon ITL program, NTS' Boxborough facility works closely with telecommunications equipment suppliers that must have their products tested to ensure compliance with the NEBS (Network Equipment Building System) specifications. These specifications are designed to ensure that telecom equipment has a high degree of reliability and will work under extreme environments while maintaining service. Other NTS facilities that are Verizon ITL laboratories are located in Tinton Falls, NJ; Plano, TX; Fullerton, CA; Sunnyvale, CA; Fremont, CA and Munich, Germany.

Technically, under the new approval, NTS performs lead-free testing of components to VZ.TPR.9307 "Verizon NEBS Compliance: Qualification Requirements for Printed Board Assemblies Manufacturered with Lead-Free Solder for use in Telecommunications Equipment." With the move to lead-free PBA (printed board assemblies), Verizon implemented VZ-TPR.9307 to ensure the continued reliability of its telecommunications network.

About NTS Boxborough

The NTS Boxborough, MA location is a full service engineering and testing facility, capable of managing complex aerospace, defense, telecommunications or commercial programs. Extensive climatic and environmental test capabilities are available, as well as custom test set ups for hydraulic testing and FAA fire testing. Environmental testing disciplines include: independent and combined thermal, humidity and altitude, salt fog, wind driven rain, fire, Icing, thermal Vacuum and explosive atmosphere. The large scale dynamics laboratory includes seven electro-dynamic shaker systems, shock towers and seismic systems including independent triax, acceleration, shock, static and dynamic loading capabilities are also available. EMI/EMC testing capabilities include radiated susceptibility, radiated emissions, magnetic emissions, conducted immunity, harmonics analysis, electrical power characteristics, airborne and structure borne noise, ESD, AC power cross and power fault, and lightning simulation indirect effects, and ESD up to 25kV. Military and aerospace capabilities include Immunity testing up to 200v/m from 10kHz to 40GHz, as well as Electrical Power Characteristics testing for ground, aircraft, shipboard, and submarine applications.

About National Technical Systems

National Technical Systems, Inc. is a leading provider of testing and engineering services to the aerospace, defense, telecommunications, automotive and high technology markets. Through a world-wide network of resources, NTS provides full product life-cycle support, offering world class design engineering, compliance, testing, certification, quality registration and program management. For additional information about NTS, visit the Company's website at www.nts.com or call 800-270-2516.

Forward-Looking Statements

The statements in this press release that relate to future plans, events or performance, are forward-looking statements that involve risks and uncertainties, including risks associated with uncertainties pertaining to customer orders, demand for services and products, development of markets for the companies' services and products and other risks identified in the companies' SEC filings. Actual results, events and performance may differ materially. Readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date hereof. The Company undertakes no obligation to release publicly the result of any revisions to these forward-looking statements that may be made to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Statements in this press release regarding National Technical Systems' business which are not historical facts are "forward-looking statements" that involve risks and uncertainties. For a discussion of such risks and uncertainties, which could cause actual results to differ from those contained in the forward-looking statements, see "Risk Factors" in the Company's Annual Report or Form 10-K for the most recently ended fiscal year.



Contact: Allen & Caron Inc

National Technical Systems

Jill Bertotti (investors)

Aaron Cohen (corporate)

[email protected]

[email protected]

Len Hall (media)

(818) 591-0776

[email protected]

Derek Coppinger (technical)

(949) 474-4300

[email protected]


(800) 270-2516

 

 

 

SOURCE National Technical Systems, Inc.

More Stories By PR Newswire

Copyright © 2007 PR Newswire. All rights reserved. Republication or redistribution of PRNewswire content is expressly prohibited without the prior written consent of PRNewswire. PRNewswire shall not be liable for any errors or delays in the content, or for any actions taken in reliance thereon.

@ThingsExpo Stories
"There's a growing demand from users for things to be faster. When you think about all the transactions or interactions users will have with your product and everything that is between those transactions and interactions - what drives us at Catchpoint Systems is the idea to measure that and to analyze it," explained Leo Vasiliou, Director of Web Performance Engineering at Catchpoint Systems, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York Ci...
Ask someone to architect an Internet of Things (IoT) solution and you are guaranteed to see a reference to the cloud. This would lead you to believe that IoT requires the cloud to exist. However, there are many IoT use cases where the cloud is not feasible or desirable. In his session at @ThingsExpo, Dave McCarthy, Director of Products at Bsquare Corporation, will discuss the strategies that exist to extend intelligence directly to IoT devices and sensors, freeing them from the constraints of ...
Connected devices and the industrial internet are growing exponentially every year with Cisco expecting 50 billion devices to be in operation by 2020. In this period of growth, location-based insights are becoming invaluable to many businesses as they adopt new connected technologies. Knowing when and where these devices connect from is critical for a number of scenarios in supply chain management, disaster management, emergency response, M2M, location marketing and more. In his session at @Th...
Extracting business value from Internet of Things (IoT) data doesn’t happen overnight. There are several requirements that must be satisfied, including IoT device enablement, data analysis, real-time detection of complex events and automated orchestration of actions. Unfortunately, too many companies fall short in achieving their business goals by implementing incomplete solutions or not focusing on tangible use cases. In his general session at @ThingsExpo, Dave McCarthy, Director of Products...
The Internet of Things will challenge the status quo of how IT and development organizations operate. Or will it? Certainly the fog layer of IoT requires special insights about data ontology, security and transactional integrity. But the developmental challenges are the same: People, Process and Platform and how we integrate our thinking to solve complicated problems. In his session at 19th Cloud Expo, Craig Sproule, CEO of Metavine, will demonstrate how to move beyond today's coding paradigm ...
There are several IoTs: the Industrial Internet, Consumer Wearables, Wearables and Healthcare, Supply Chains, and the movement toward Smart Grids, Cities, Regions, and Nations. There are competing communications standards every step of the way, a bewildering array of sensors and devices, and an entire world of competing data analytics platforms. To some this appears to be chaos. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, Bradley Holt, Developer Advocate a...
Apixio Inc. has raised $19.3 million in Series D venture capital funding led by SSM Partners with participation from First Analysis, Bain Capital Ventures and Apixio’s largest angel investor. Apixio will dedicate the proceeds toward advancing and scaling products powered by its cognitive computing platform, further enabling insights for optimal patient care. The Series D funding comes as Apixio experiences strong momentum and increasing demand for its HCC Profiler solution, which mines unstruc...
SYS-CON Events has announced today that Roger Strukhoff has been named conference chair of Cloud Expo and @ThingsExpo 2016 Silicon Valley. The 19th Cloud Expo and 6th @ThingsExpo will take place on November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA. "The Internet of Things brings trillions of dollars of opportunity to developers and enterprise IT, no matter how you measure it," stated Roger Strukhoff. "More importantly, it leverages the power of devices and the Interne...
In addition to all the benefits, IoT is also bringing new kind of customer experience challenges - cars that unlock themselves, thermostats turning houses into saunas and baby video monitors broadcasting over the internet. This list can only increase because while IoT services should be intuitive and simple to use, the delivery ecosystem is a myriad of potential problems as IoT explodes complexity. So finding a performance issue is like finding the proverbial needle in the haystack.
Machine Learning helps make complex systems more efficient. By applying advanced Machine Learning techniques such as Cognitive Fingerprinting, wind project operators can utilize these tools to learn from collected data, detect regular patterns, and optimize their own operations. In his session at 18th Cloud Expo, Stuart Gillen, Director of Business Development at SparkCognition, discussed how research has demonstrated the value of Machine Learning in delivering next generation analytics to imp...
Whether your IoT service is connecting cars, homes, appliances, wearable, cameras or other devices, one question hangs in the balance – how do you actually make money from this service? The ability to turn your IoT service into profit requires the ability to create a monetization strategy that is flexible, scalable and working for you in real-time. It must be a transparent, smoothly implemented strategy that all stakeholders – from customers to the board – will be able to understand and comprehe...
The cloud market growth today is largely in public clouds. While there is a lot of spend in IT departments in virtualization, these aren’t yet translating into a true “cloud” experience within the enterprise. What is stopping the growth of the “private cloud” market? In his general session at 18th Cloud Expo, Nara Rajagopalan, CEO of Accelerite, explored the challenges in deploying, managing, and getting adoption for a private cloud within an enterprise. What are the key differences between wh...
The IoT is changing the way enterprises conduct business. In his session at @ThingsExpo, Eric Hoffman, Vice President at EastBanc Technologies, discussed how businesses can gain an edge over competitors by empowering consumers to take control through IoT. He cited examples such as a Washington, D.C.-based sports club that leveraged IoT and the cloud to develop a comprehensive booking system. He also highlighted how IoT can revitalize and restore outdated business models, making them profitable ...
IoT offers a value of almost $4 trillion to the manufacturing industry through platforms that can improve margins, optimize operations & drive high performance work teams. By using IoT technologies as a foundation, manufacturing customers are integrating worker safety with manufacturing systems, driving deep collaboration and utilizing analytics to exponentially increased per-unit margins. However, as Benoit Lheureux, the VP for Research at Gartner points out, “IoT project implementers often ...
When people aren’t talking about VMs and containers, they’re talking about serverless architecture. Serverless is about no maintenance. It means you are not worried about low-level infrastructural and operational details. An event-driven serverless platform is a great use case for IoT. In his session at @ThingsExpo, Animesh Singh, an STSM and Lead for IBM Cloud Platform and Infrastructure, will detail how to build a distributed serverless, polyglot, microservices framework using open source tec...
The idea of comparing data in motion (at the sensor level) to data at rest (in a Big Data server warehouse) with predictive analytics in the cloud is very appealing to the industrial IoT sector. The problem Big Data vendors have, however, is access to that data in motion at the sensor location. In his session at @ThingsExpo, Scott Allen, CMO of FreeWave, discussed how as IoT is increasingly adopted by industrial markets, there is going to be an increased demand for sensor data from the outermos...
CenturyLink has announced that application server solutions from GENBAND are now available as part of CenturyLink’s Networx contracts. The General Services Administration (GSA)’s Networx program includes the largest telecommunications contract vehicles ever awarded by the federal government. CenturyLink recently secured an extension through spring 2020 of its offerings available to federal government agencies via GSA’s Networx Universal and Enterprise contracts. GENBAND’s EXPERiUS™ Application...
A strange thing is happening along the way to the Internet of Things, namely far too many devices to work with and manage. It has become clear that we'll need much higher efficiency user experiences that can allow us to more easily and scalably work with the thousands of devices that will soon be in each of our lives. Enter the conversational interface revolution, combining bots we can literally talk with, gesture to, and even direct with our thoughts, with embedded artificial intelligence, wh...
"delaPlex is a software development company. We do team-based outsourcing development," explained Mark Rivers, COO and Co-founder of delaPlex Software, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.
"We work in the area of Big Data analytics and Big Data analytics is a very crowded space - you have Hadoop, ETL, warehousing, visualization and there's a lot of effort trying to get these tools to talk to each other," explained Mukund Deshpande, head of the Analytics practice at Accelerite, in this SYS-CON.tv interview at 18th Cloud Expo, held June 7-9, 2016, at the Javits Center in New York City, NY.